Студопедия

Главная страница Случайная страница

Разделы сайта

АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатикаИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханикаОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторикаСоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансыХимияЧерчениеЭкологияЭкономикаЭлектроника






Looking at Field Results






On the 3D Geometry plot it is possible to see the initial pressure field and the last stored pressure field. Also on the “3D Geometry Plot Display” in the “Cross-Section” tab a horizontal cross-section at a desirable depth can be chosen.

 
 

I choose a depth 5960 ft and the last stored pressure (Fig. 17).

It is seen from the picture that the strongest pressure depletion is located near production well. And the higher pressure values are located in the north-west part where shale rock are crossed by the 5960ft horizontal cross-section.

On the 2D Geometry plot I can set a current stratigraphic depth and see evolution of selected properties with time (Fig. 18).

 
 

Final saturation field show us that water invades the top layer by passing across the null-thickness region of the shale layer (Fig. 19).

 
 

After replaying the simulation on the Cross-Section plot I can read the last saturation values (Fig. 20).

 
 

As can be seen above, some free gas appears by pressure depletion around P01 during the simulation (Sg=0.133312).

 


 



Application 1. Flow properties for P01

       
   
 
 
 
 


 






© 2023 :: MyLektsii.ru :: Мои Лекции
Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав.
Копирование текстов разрешено только с указанием индексируемой ссылки на источник.