Laptops vs Desktops

In a way, the skyrocketing popularity of laptop computers is ironic. They're completely portable, and they use less power and make less noise than desktop models. But, they're often a little slower and have less graphics and sound processing power, although these differences can be too small for most users to notice.

Laptops are also more expensive than desktops. The price gap is closing, though –- laptop prices are falling faster than desktop prices, and laptop PCs actually outsold desktop models for the first time in May of 2005.

How can all the equipment found in a desktop tower fit into such a small package? And how can laptops be efficient enough to run on battery power alone?

Overall, laptop and desktop computers are very similar. They have the same basic hardware, software and operating systems. The primary difference is how their components fit together.

A desktop computer includes a motherboard, video card, hard drive and other components in a large case. The monitor, keyboard, and other peripherals connect wirelessly or with cables. Whether the case sits vertically or horizontally, it has lots of space for add-in cards, cables and air circulation.

A laptop, however, is much smaller and lighter than even the most compact PC tower. Its screen is an integrated part of the unit, as is its keyboard. Instead of a spacious case with lots of room for air circulation, a laptop uses a small, flat design in which all the pieces fit together snugly.

Because of this fundamental design difference and because of a laptop's inherent portability, components have to:

· Fit into a compact space

· Conserve power

· Produce less heat than desktop components

Often, these differences make the components more expensive, which can contribute to higher laptop prices.

In the following sections, we'll examine how laptops handle these differences.

The microprocessor, or CPU, works with the operating system to control the computer. It essentially acts as the computer's brain. The CPU produces a lot of heat, so a desktop computer uses circulating air, a fan and a heat sink to draw heat off of the processor -- to cool off. Since a laptop has far less room for each of these cooling methods, its CPU usually:

· Runs at a lower voltage and clock speed -- This reduces heat output and power consumption but slows the processor down. Most laptops also run at a higher voltage and clock speed when plugged in, and at lower settings when using the battery.

· Mounts to the motherboard without using pins -- Pins and sockets take up a lot of room in desktop PCs. Some motherboard processors mount directly to the motherboard without the use of a socket. Others use balls instead of pins. These designs save space, but in some cases mean that the processor cannot be removed from the motherboard for replacement or upgrading.

· Has a sleep or slow-down mode -- The computer and the operating system work together to reduce the CPU speed when the computer is not in use or when the processor does not need to run as quickly.

Laptops usually have small fans, heat sinks to help dissipate the heat from the CPU. Some higher end laptop models reduce heat even further with liquid coolant kept in channels alongside the heat pipe. Also, most laptop CPUs are near the edge of the unit. This allows the fan to move the heat directly to the outside instead of across other components.

A laptop's memory can make up for some of the reduced performance that comes from a slower processor. Some laptops have cache memory on or very near the CPU, allowing it to access data more quickly. Some also have larger busses, allowing data to move between the processor, motherboard and memory more quickly.

Like a desktop, a laptop has an internal hard disk drive, which stores the operating system, applications and data files. However, laptops generally have less disk space than desktops. A laptop hard drive is also physically smaller than that of a desktop. In addition, most laptop hard drives spin more slowly than desktop hard drives, reducing both heat and power consumption.

Desktop computers have multiple bays for installing additional drives, such as CD and DVD ROM drives. However, space in a laptop is in much shorter supply. Many laptops use a modular design, allowing a variety of drives to fit in the same bay. These drives come in three different designations:

· Hot swappable - The computer can stay on while changing the drive.

· Warm swappable - The computer can stay on while changing the drive, but the corresponding bus (the path the drive uses to send data to the CPU) must be inactive.

· Cold swappable - The computer must be off during the swap.

A graphics processing unit (GPU) is a microprocessor that handles the calculations necessary for 3-D graphics rendering. Like a CPU, a GPU produces a lot of heat. Most laptops have graphics capability built into the motherboard or have smaller graphics cards with a GPU designed specifically for laptop use. Laptops frequently share memory between the CPU and the GPU, saving space and reducing power consumption.

Many people don't notice a laptop's reduced graphics performance. Laptops have plenty of processing power for Web surfing and productivity applications. However, they may struggle with the latest 3-D games. A few specialty laptops, designed for gaming enthusiasts, include more powerful GPUs and additional video memory.

A laptop displays its graphics on a liquid crystal display (LCD) screen. Most screens measure between 12 and 17 inches, and the size of the screen affects the overall size of the laptop.

Most laptops also have sound cards or integrated sound processing on the motherboard as well as small, built-in speakers. However, there is generally not enough space inside a laptop for a top-of-the-line sound card or a high-quality speaker. Gaming enthusiasts and audiophiles can supplement their laptops' sound capabilities with external sound controllers, which use USB or FireWire ports to connect to the laptop.

Laptops and desktops both run on electricity. However, unlike a desktop computer, a laptop is portable and can run on batteries alone.

LiIon batteries are the current standard for laptop computers. They are light and have long life spans. They can be charged randomly, and won't overheat if overcharged. They are also thinner than any other battery available for laptops, making them ideal for the new ultra-thin notebooks. LiIon batteries can last for anything from about 950 up to 1200 charges. Many laptops with LiIon batteries claim to have a 5-hour battery life, but this measurement can vary greatly depending on how the computer is used.

Many people build custom PCs for themselves or customers. These home-made computers, called whiteboxes, represent a significant portion of the computer market. Some people also modify their computers for cosmetics or performance. This is called modding. But what about building or modding a laptop?

A modded or homemade laptop is called a whitebook. Whitebooks represent about 5 percent of the notebook market right now, and this number is slowly rising. The industry has done a pretty good job of keeping end users out of laptops. They've made it difficult to open, modify and get parts for a laptop. In addition, opening the laptop chassis voids the manufacturer's warranty in most cases.

It is still difficult to find parts to build a laptop from the ground up, but vendors like ASUS and ECS allow some customers to order blank laptop shells. They are especially open to resellers who build whitebooks and sell them to customers. In addition, people can mod or upgrade what came with the shell. Companies like TechStyle have made a business of it.

A laptop shell consists of:

· Chassis

· Motherboard

· Optical drive

· Display

· Keyboard

· Graphics Card

This means that anyone wanting to build a whitebook must find:

· Microprocessor

· RAM

· Wireless card

At this point, there are no real standards for the form factor (shape and design) of laptop parts. Processors designed for laptops are available for sale, but finding a motherboard for those chips is a different story. Hard drives are pretty standard, but other parts may take some digging.

In 1979, William Moggridge of Grid Systems Corporation created the first functioning portable computer: The Grid Compass Computer 1109. NASA bought a handful of them at $800 apiece for use in the space program.

Other companies, like Gavilan Computer and Apple, introduced other portable computers in the following years. The first commercially viable machine, however, was the IBM PC Convertible, introduced in 1986.

Weighing in at a hefty 12 lbs (5.4 kg), the PC Convertible sold for $3, 500. It was the first portable computer with the clamshell design used in today's laptops. The success of the PC Convertible was the catalyst for competitors like Compaq and Toshiba to switch to the clamshell design in their portable computers. And so began the era of the laptop computer.