Студопедия

Главная страница Случайная страница

Разделы сайта

АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатикаИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханикаОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторикаСоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансыХимияЧерчениеЭкологияЭкономикаЭлектроника






Design and testing requirements






 

 

Title 10 of the Code of Federal Regulations, Part 50, Appendix A, General Design Criteria (GDC 54-57) or some other design basis provides the basic design criteria for isolation of lines penetrating the containment wall. Each large pipe penetrating the containment, such as the steam lines, has isolation valves on it, configured as allowed by Appendix A; generally two valves. For smaller lines, one on the inside and one on the outside. For large, high-pressure lines, space for relief valves and maintenance considerations cause the designers to install the isolation valves near to where the lines exit containment. In the event of a leak in the high-pressure piping that carries the reactor coolant, these valves rapidly close to prevent radioactivity from escaping the containment. Valves on lines for standby systems penetrating containment are normally closed. The containment isolation valves may also close on a variety of other signals such as the containment high pressure experienced during a high-energy line break (e.g. main steam or feedwater lines). The containment building serves to contain the steam/resultant pressure, but there is typically no radiological consequences associated with such a break at a pressurized water reactor.

 

During normal operation, the containment is air-tight and access is only through marine style airlocks. High air temperature and radiation from the core limit the time, measured in minutes, people can spend inside containment while the plant is operating at full power. In the event of a worst-case emergency, called a " design basis accident" in NRC regulations, the containment is designed to seal off and contain a meltdown. Redundant systems are installed to prevent a meltdown, but as a matter of policy, one is assumed to occur and thus the requirement for a containment building. For design purposes, the reactor vessel's piping is assumed to be breached, causing a " LOCA" (loss Of coolant accident) where the water in the reactor vessel is released to the atmosphere inside the containment and flashes into steam. The resulting pressure increase inside the containment, which is designed to withstand the pressure, triggers containment sprays (" dousing sprays") to turn on to condense the steam and thus reduce the pressure. A SCRAM (" neutronic trip") initiates very shortly after the break occurs. The safety systems close non-essential lines into the air-tight containment by shutting the isolation valves. Emergency Core Cooling Systems are quickly turned on to cool the fuel and prevent it from melting. The exact sequence of events depends on the reactor design.

 

Containment buildings in the US are subjected to mandatory testing of the containment and containment isolation provisions under 10 CFR Part 50, Appendix J. Containment Integrated Leakage Rate Tests (Type " A" tests or CILRTs) are performed on a 15 year basis. Local Leakage Rate Tests (Type B or Type C testing, or LLRTs) are performed much more frequently both to identify the possible leakage in an accident and to locate and fix leakage paths. LLRTs are performed on containment isolation valves, hatches and other appurtenances penetrating the containment. A nuclear plant is required by its operating license to prove containment integrity prior to restarting the reactor after each shutdown. The requirement can be met with satisfactory local or integrated test results (or a combination of both when an ILRT is performed).

 

 

In 1988, Sandia National Laboratories conducted a test of slamming a jet fighter into a large concrete block at 481 miles per hour (775 km/h). The airplane left only a 2.5-inch deep gouge in the concrete. Although the block was constructed like a containment building missile shield, it was not anchored, etc., the results were considered indicative. A subsequent study by EPRI, the Electric Power Research Institute, concluded that air planes, even commercial airliners did not pose a danger as long as they didn’t carry an explosive WMD.

 

The Turkey Point Nuclear Generating Station was hit directly by Hurricane Andrew in 1992. Turkey Point has two fossil fuel units and two nuclear units. Over $90 million of damage was done, largely to a water tank and to a smokestack of one of the fossil-fuelled units on-site, but the containment buildings were undamaged.

 






© 2023 :: MyLektsii.ru :: Мои Лекции
Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав.
Копирование текстов разрешено только с указанием индексируемой ссылки на источник.