Главная страница Случайная страница
Разделы сайта
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатикаИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханикаОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторикаСоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансыХимияЧерчениеЭкологияЭкономикаЭлектроника
Reassembly information
|
|
LEFT-SIDE
| Tightening torque | |||
| ITEM | N·m | kg-m | lb-ft |
| ® @ | 48 -72 | 4.8 - 7.2 | 34.5 -52.0 |
| © @ | 84 -120 | 8.4 - 12.0 | 60.5 -87.0 |
l-1---t--- --®
---------SHOCK ABSOR BER
-+- SWINGAR M
--+-----'r---- CUSH I0N
LEVE R ROD
© @ CUSHION LEV ER
Point ®
Apply SUZUKI super grease " A".
Point @
|
Point ©
Apply SUZUKI super grease " A".
REASSEMBLY AND REMOUNTI NG
Reassemble and remount the swingarm, rear shock absorb er, rear cushion lever rods and cushion lever. Pay attention to the following points:
|
• Press-fit the bearings into the swingarm pivot.
09941-34513: Steering outer race installer
NOTE:
When installing the bearings, punch-marked side of bearing faces outside.
• Apply grease to the spacers and dust seals when install ing them.
(For U.S.A. model)
99000-25030: SUZUKI SUPER GREASE II A 11
(For the other models)
99000-25010: SUZUKI SUPER GREASE 11 A 11
CUSHION LEVER
•
|
09941-34513: Steering outer race installer
• Apply grease to the bearings.
(For U.S.A. model)
99000-25030: SUZUKI SUPER GREASE II A 11
(For the other models)
|
CUSHION LEVER ROD
• Press-fit the cushion lever rod bearings into the cushion lever rod pivot.
09941-34513: Steering outer race installer
•
|
(For U.S.A. model)
99000-25030: SUZUKI SUPER GREASE II A 11
(For the other models)
99000-25010: SUZUKI SUPER GREASE 11A"
TIGHTENI NG TORQUE
• Install the rear suspension and tighten each nut to the specifi ed torque. (Refer to page 7-44.)
|
|